-40%
White Nylon Furniture Levelers - 1/4
White Nylon Furniture Levelers - 1/4

White Nylon Furniture Levelers - 1/4" Threaded Shank - Set of 4

$ 1.57

Availability: 47 in stock
  • Finish / Color: White
  • Type: N
  • Condition: New
  • Brand: Desunia
  • Item Length: 2
  • Item Height: 2
  • Item Width: 1
  • Material: Nylon

    Description

    PLENTY STRONG - Each leg can support 100 lbs. so a set of 4 can handle furniture pieces as heavy as 400 lbs.!
    FLOOR FRIENDLY - The nylon foot is an inconspicuous 1" in diameter and is kind to hardwood floors!
    LOTS OF ADJUSTMENT - Each leg can be adjusted from 0" to 9/16". Plenty for even the most out-of-whack floors!
    EASY PEEZY INSTALLATION - Drill a 5/16" hole in each corner, tap in T-nuts, screw in levelerÂ…. DONE!
    YOU GET - 4 Brown Levelers & 4 T-Nuts
    Just say NO to wobbly furniture!
    If uneven, tipsy furniture has been driving you crazy, these handy levelers from Desunia can help. Put them on tables, stools, grandfather clocks, or virtually any wood cabinet that needs leveling. They install in minutes, are almost invisible, and are super easy to adjust!
    Specifications
    Each leg has a 1/4" threaded stud that's 1" long, which gives you up to 9/16" of height adjustment. The brown nylon foot is kind to floors, measures 1" in diameter, and is tapered along its sides, so the part that actually contacts the floor is about 3/4" across. Little ridges around its circumference makes it easy to grip during adjustment. Load capacity is 100 lbs. per leg, so the whole set can handle furniture pieces as heavy as 400 lbs.
    Easy Peezy Installation
    Could it be any simpler? Just drill a 5/16" hole that's 1" deep at each corner (pro tip... wrap a piece of tape around the drill bit to act as a depth gauge), tap in the T-nuts with a hammer, and screw in the levelers. Then back each one out as necessary to achieve sanity-saving, blissful evenness. The whole process can be done in less than 10 minutes (and that assumes you're taking it easy)... DONE!
    Here's what you get...
    Just use an adjustable square to ensure a uniform set-back from the front of the cabinet, and attach each leg with the 4 screws that are provided. Be sure to locate each leg so it lines up with the cabinet sides, for maximum strength (otherwise you're relying on the strength of the assembly screws).
    4 Matching T-nuts