-40%
Wireless Pump Control 4CH System Long Range, Alarm, Tank Level Remote Radio 30dB
$ 369.58
- Description
- Size Guide
Description
Industrial Wireless Radio ControlsNEMA4
(2) One Channel
Wireless Remote Control Switch Transmitter / Relay Receiver
Set and Two Omni Antenna.
Part N 943302
Features
Range: Up To 1500 ft Line-of-sight
Optional Long Range 3 Km Yagi antenna search Ebay for: 32yagi
Receiver Relay 30 Amp SPST, Class 2 Pilot Duty
Power required 12 VDC ( FREE POWER SUPPLY 120/220VAC INCLUDED)
Weatherproof Fiber Enclosures 9x9x4 inches
Factory configured, Ready-To-Operate
License Free Radio Operation 433MHz, ISM Band
> Optional Long Range 3 Km Yagi antenna search Ebay for: 32yagi
Applications:
Tank Level Monitoring, Pump or Motor Control, Valve Activation, etc.
Description
The 943301 transmitters and receivers are designed for use in various wireless remote-control applications.
When triggered with an external dry-contact float switch, Pressure Sw, timer sw. etc,
the transmitter will send a digital encoded signal to its companion control receiver.
The receiver will verify the digital code and then activate its relay output.
INCLUDED : FREE DIN Power Supply 110/220VAc input 12VDC regulated output
Wireless System General Specifications
Radio Frequency: 433 MHz
Regulatory: FCC Part 15 (No license required)
Control Channels: 4
Transmitter/Receiver Code Matching: Factory set
Antenna Connection: RP-SMA
Wiring Connection: Wires
Transmit/Receive Range
(with included antennas): Indoor/Urban 500mts (1700ft), Line-of-sight 1 Km
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4 Fiber
Antennas: 4dBi, Omni 7 inch w 5 ft coax (Included)
Transmitter Specifications
Control Input Type: wires (Dry-contact)
RF Power Output: 1000mW
RF Data Rate: 250 kbps
RF Output Impedance: 50 Ohm nominal
Operating Power: 12 VDC @ 5W max
Receiver Specifications
Receive Sensitivity: -100 dBm
RF Input Impedance: 50 Ohm nominal
Operating Power: 12 VDC @ 3W max
Control Output: Relays, 30A, 240VAc/ 30V, SPDT Class 2 Pilot duty
Regulatory Compliance FCC Part 15 (No license required)
Product made in USA
Applications:
Industrial Monitoring, Pump control, Lighting controls,
Monitor remote instruments, sensors and detectors, Generators
Packing and mobile system, SCADA installations,
Factory process control and alarms.
Specifications
Digital Transmitter
Supply power
12 VDC @ 400 mA
Inputs
N/O Normally Open, digital dry contact
Transmitter power
per FCC Part 15.249, 50mV/m @ 3m
Transmission
Digital Encoded
Gaussian_frequency-shift_keying
Channels
16 addresses per system GFSK
Input Wiring
Wires, Dry Contact
Response
Loop 500 msec
Weight
0.8 lb (0.40kg) each unit
Dimensions
9 x 9 x 3. in.
Specifications
Digital Receiver
Supply power
12 VDC @ 300 mA
Output
Relay SPST contact 5.Amp, 250VAc/30V Class 2 pilot duty
Frequency
433 MHz • License free Industrial ISM band
Configuration
DIP switch factory preset
Compliance
FCC CFR part 15.247, 95 sub E
Wiring
Relay Terminal
Antenna Z
50 Ohm SMA RF connector
Ambient temp
14° to 140° F (-10° to 60° C)
Enclosure
Weatherproof IP65,
UL94-5VA
,
DISCLAIMER:
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.
.